Maintenance & Repairs
Why does my boiler keep losing pressure?
By Peter Lawrence · 16 November 2026

The short answer: something is letting water out of your heating system. Usually it is a small leak, a faulty pressure relief valve, or a part inside the boiler called the expansion vessel. Topping it up yourself is fine now and then. If you are topping it up every few weeks, you need an engineer.
What pressure should it be?
Most combi boilers want between 1 and 1.5 bar when the heating is cold. Check your boiler manual.
The usual causes
- You have just bled the radiators. This lets air out and the pressure drops a little. Top it up once and it should stay.
- A small leak. Look for drips or damp marks under radiator valves and along pipes, or stains on ceilings.
- The pressure relief valve. Find the small copper pipe running from your boiler to the outside wall. If it drips or there is a damp patch below it, the valve may be faulty.
- The expansion vessel. If the pressure jumps high when the heating is on and drops when it's off, this part may need recharging or replacing.
What you can and can't do
Safe: top up the pressure using the filling loop, exactly as your boiler manual shows. Not safe: opening up the boiler. Anything inside the boiler must be done by a Gas Safe registered engineer.
Prevent it
A yearly boiler service (£139 with Propfix) catches worn parts before they fail.
Covering Harrow, Northwood, Ruislip, Uxbridge and Watford. Book at prop-fix.co.uk or call 01895 444 999.
Want it sorted?
Book online at a fixed price including VAT, or call us on 01895 444 999.


